MTTplus 410 OTDR
- Support OTDR, OPM, Light Source and VFL.
- Multimode Wavelength options – 850 & 1300 nm
- Singlemode Wavelength options -1310,1490,1550,1625 &1650 nm
- Live fiber detection to avoid service disruption of active subscribers
- Dynamic range up to 45 dB for long haul fibers and PON splitters
- Fixed or Universal optical connectors with UPC or APC interface options
FX150+ Mini OTDR
- Robust, compact, lightwave OTDR with in-built power meter, light source, visual fault locator and fiber inspection probe.
- 260,000 sampling points giving 3 cm Sampling Resolution
- Filtered 1625 or 1650 nm OTDR port for in-service measurements
- Live fiber detection with embedded power meter Dynamic range up to 45 dB
- Event dead zone < 1m, attenuation dead zone < 4m Singlemode wavelength options – 1310, 1490, 1550, 1625 and 1650 nm
- Multimode wavelength options – 850 and 1300 nm
- Direct remote access from smartphone through “EZ-Remote”
- Generates and saves traces in sor, png or pdf format
- Tags test location to results
- Directly pushes results to FiberizerTM cloud server
- > 9 hours battery Back-up
FX120 – PON Analyzer
- Compatible with GPON, XG(S)-PON, and EPON networks
- Layer 4+ Test option including V-TEST, V-PERF, and V-FTP up to 10GE
- all-in-one advanced PON analyzer with a native RJ45 port and an SFP+ cage
- Pass/Fail ITU-T thresholds enable fast, efficient, and consistent turn-up of services
- Dual port wavelength filtered, through-meter for simultaneous ONT/ONU service verification
- Automatic GPON/XG(S)-PON PON-ID detection
- Decodes GPON & XGS-PON communications between OLT & ONTs
- Supports PLOAM and OC Decode
- ODN loss calculation based on RX power and PLOAM TOL
- Faster result transfer, easy report generation and management
- Upload/download to centralized and cloud services (VeSion® R-Server™, EZ-Remote™, Web Remote, etc.)
- Remote Access and Control: Efficient collaboration via web browser and VNC® client
FX41xT- Selective PON Optical Power Meter
- Downstream signal verification for 1G/10G PON networks
- Simultaneous 1490/1577 nm signal level measurements
- Wavelength-selective level measurements:
- G-PON per ITU-T G.984.2
- XGS-PON per ITU-T G.9807.1
- EPON & 10G-EPON per IEEE 802.3av
- Calibrated PON wavelengths (Downstream):
- 1490 nm (G-PON)
- 1577 nm (XGS-PON)
- Selective Spectral Passband
- Accurate measurements even in the presence of other wavelengths
- 1490 nm (1480 to 1500 nm)
- 1577 nm (1572 to 1582 nm)
- Display Resolution: 0.1 dB
- Absolute Accuracy: ± 0.5 dB
FX80 PON Optical Power Meter
- ONU and OLT test ports with pass-through design
- In-Line optical power meter for FTTx/PON service activation. It simultaneously measures downstream signals to the ONT and upstream signals to the OLT.
- Concurrent measurement and display of Upstream and Downstream signals
- 1310 nm Upstream CW/Burst signal support
- 1490/1550 nm Downstream signal support
- Programmable thresholds with Pass/Fail indication
- Optional broadband power meter with universal adaptors
- Wired transfer of stored results to a PC via micro USB
- PC software for data transfer, management and report generation
Optical Power Meter (OPM)
- Calibrated wavelengths: 46 calibrated lambdas including 850, 1300, 1310, 1490, 1550, 1625, 1650 nm and 8 custom wavelengths (programmable via LTSync Pro)
- Level measurement: PM1: -70 to +10 dBm or PM2: -55 to +25 dBm
- Accuracy: +0.2 dB or 5% PM1: -65 to +10 dBm or PM2: -50 to +25 dBm
- Wave ID detection (compatible VeEX source): all lambdas
- New auto OLS cycle added (requires firmware upgrade)
Optical Light Source (OLS)
- Wavelengths: 1310/1490 nm or 1310/1550 nm
- Test Tone Generation: 270, 1 KHz, 2 KHz
- Stability: ± 0.03 dB for insertion loss measurements
FX45/40
- Supports single-mode and multi-mode testing
- Dual wavelength laser source and power meter options
- OPM, OLS, ORL, OLTS configuration
- Optional OLTS for bidirectional loss measurements
- Optional ORL meter for return loss measurement
- PON, Telecom, CATV applications
- High accuracy and wide dynamic range
- High contrast monochrome LCD display with backlight
- Alkaline or Rechargeable battery option
- Interchangeable optical adapters support multiple connector types
Optical Power Meter OPM:
- Calibrated wavelength:850,1300,1310,1490,1550,1625 1650 nm
- Power level range, PM1: -65 to 7dBm, PM1: -50 to 25dBm
- Accuracy up to ±0.2 dB or 5%
- Optical Adaptors: FC, SC, ST, LC, E2000
Optical Light Source OLS:
- Supported Wavelengths:1310/1490 nm or 1310 / 1550 nm for single mode and 850/1300 nm for multimode
- Output Power > -5dBm
- Optical Adaptors: FC, SC, ST, LC, E2000
- Optical Interface: UPC or APC (fixed)
Visual Fault Locator VFL:
- Emitter type: LASER
- Supported wavelength: 650nm
- Output Power: 1mW
FL41 : Optical Fault Locator
- Singlemode cable length verification
- Built-in filter for in-service fault locating
- Wavelengths: 1625 nm / 1625 (F) nm
- Measurement Range: 10m to 20 km
- Class 1 Laser Safety
OPM
- Wavelength range: 1260 to 1680 nm
- Calibrated wavelengths: 1310, 1490, 1550, and 1625 nm
- Measurement range: -35 to 0 dBm
Remote Fibre Monitoring System
The Remote Fiber Test System (RFTS) comprises the RTU-4000 platform with the RTU-4100 OTDR optical test module. The RFTS monitors optical fiber infrastructures in Core, Metro, Access and FTTx/PON networks, improving workflow and reducing Mean Time to Repair (MTTR). The RFTS can be operated in standalone mode or as part of a centralized Monitoring System.
OXA4000 – Optical Switch
Key Features
- Low insertion loss
- Wide and flat passband
- Fast switching time, <8 ms for adjacent channels
- Protocol and bit-rate independent
- Single mode fiber support
- Low reflectance and ORL
- FWDM compatible with data traffic and in-service OTDR monitoring using 1625 nm or 1650 nm
RTU-4000/4100
Key Features
- Up to 500,000 sampling points with 3 cm resolution
- OTDR test port equipped with live fiber detection for monitoring P2P or PON networks
- Out of service/dark fiber testing at 1310, 1550, 1625, or 1650 nm
- In-service testing using filtered 1625 nm or 1650 nm
- OTDR test ports fitted with fixed or universal connectors
- Built-in launch fiber
- Up to 50 dB dynamic range
- Event dead zone < 1m, Attenuation dead zone < 4m typ.
- Telcordia SR-4731.sor trace format
- V-Scout fiber characterization using multiple acquisitions complete with link map and event tables
- Proactively monitor network fibers in real-time, 24/7
- On demand OTDR testing can be automatically triggered by RF or Ethernet probes within VeSion system
- DOCSIS UCD loss
- OTN/Ethernet link loss event
Key Features
Up to 2 independent Test Blades with:
- OTDR test port (up to 3 λs) 1310nm, 1550nm, 1625nm, 1650nm (filter or unfiltered)
- Optical Power Meter (OPM) option
- Visual Fault Locator (VFL) option – 650nm
- Ruggedized 1U, 19” rack mount profile and construction
- Fully compatible with VeEX OX4000 MEMS optical switches scalable from 1 up to 128 ports
- OSS integration using SNMP
- SMS and email alerting
- GIS Mapping with Fiber Route Viewing
- Software Programming and Application support using embedded HTTP server testing including trace data analysis and management Transport system probes
VeSion
- Cloud-based – one system platform
- Monitor RF (Return and Forward), MPEG, Ethernet, Fiber and PNM (Return and Forward)
- True Return Path QAM analyzer and tracer with Bursty QAM Demodulator
- Upstream testing qualification and troubleshooting
- Workflow, configuration, asset and test-data management, data enrichment and mapping
- Web, tablet or field meter access
- Sweep (Forward and Return)
- High resolution true non-interfering 5 to 1.8 GHz downstream sweep system with Manual and Automatic Gain & Slope Offsets
- Dark or Active Fiber Monitor to alert for changes on fiber including loss, microbend, reflectance or breaks
- On-demand Optical Fiber Testing: OTDR, VFL, OLS and OPM
- Geographic Information System (GIS)
DI-1000- MPO Digital Fiber Inspection Microscope
- Inspect patch cords and bulkheads
- Supports 12 up to 48 fiber MTP/MPO connector types
- Large field of view (FOV) 425 x 320 μm
- Widest host platform compatibility in the industry
– Select VeEX test platforms
– Windows PC – Fiberizer™ Scope software
– Mobile devices – Fiberizer™ software (Android & iOS) - A comprehensive range of single and multi-fiber tips, including PC and APC versions
- Quick tip replacement – MTP/MPO and single fiber
FX10+ Visual Fault Locator
- Small pen size for field applications Simple operation
- CW and Pulsed operation,Output power: 1 mW or 10 mW models available.
- Rugged and Weatherproof
- Lightweight anodized aluminum construction
- Durable dust cap to protect optical interface Class 2M, eye safe laser rating
- Low battery indication
- Accessories include (2) AA alkaline batteries and carrying pouch with wrist strap