Sage 960B
- The 960B combines TDM, Ethernet, and Analog interfaces with unparalleled "Real-Time" simultaneous test capability to comprehensively test and monitor Next Generation Elements and Networks.
- Supports 2-wire, 4-wire, ISDN PRI and SIP calls with voice quality measurement and SLA verification.
- Measures MOS and R-factor.
- Voice Processing & IP Telephony Transparency Testing.
- VoIP Service Pre-Qualification, Turn-Up Testing, and Troubleshooting.
- IMS VoIP & Video Certification.
- Echo Cancellation Performance.
- Measures background noise.
Allegro
- Low-cost, portable-sized units for network testing, travel or low-line count applications in the lab.
- Supports T1/E1, POTS and IP interfaces.
- Allegro products operate similarly with much smaller line counts and are used in smaller developer test beds, customer support applications, in network testing scenarios or when lower cost products are desired.
- E1/T1 using SS7, PRI and CAS.
- IP using SIP and MGCP.
- POTS using loop and ground start.
Fortissimo
- 19-inch, 1RU modules for lab environments and high capacity testing.
- Supports OC3/STM1, DS3, T1/E1, IP, POTS and DECT interfaces.
- Fortissimo products simulate large volumes of telephony traffic over PSTN and IP interfaces using common signaling protocols.
- They are most typically used in lab environments and when high subscriber counts are needed.
- STM1/OC3, DS3, E1/T1, using SS7, PRI and CAS signaling.
- IP using SIP and MGCP signaling.
- POTS using loop and ground start signaling.
- DECT wireless.
Omni-Q Wireline Data Service Monitoring Systems
- Probe Based Monitoring Solution for Service Assurance on Mobile Broadband (UMTS/GPRS, EVDO), VoIP, NGN and IMS networks.
- Provides near-real time visibility on Service Delivery - for each subscriber call or session.
- Drill down to root cause of faults.
- Provides detailed and aggregated data to predict performance trends for services.
- Unified monitoring system for end-to-end network coverage.
- Provides Alarms and Alerts on service delivery indicators, such as throughput, latency, voice quality etc.
- Correlated view of sessions or calls as they traverse from one network element to the other.
- Vendor neutral solution.
- Proven solution in India for VoIP and mobile packet core networks (Gn/Gi and A10/A11).
MX100+/MX 120: Handheld Ethernet Tester
- Handheld metro and carrier Ethernet tester. Single or Dual port configurations for 10/100/1000 Base-T and 100/1000 Base-X.
- Large Touch screen based colour graphical LCD display with intuitive menu for very user friendly operational interface. Can also be operated by keypad.
- Layer 1 framed as well as unframed testing. Important for testing capability of dark fiber (Such as CWDM, DWDM) to handle Ethernet bandwidth.
- Layer 2, Layer 3 & Layer 4 BERT and RFC2544 testing.
- Supports asymmetrical RFC2544 testing for validation of services like 3G, DSL etc.
- Supports Omni-Q with 3 VLAN and MPLS tags.
- Tests VoIP i.e. SIP calls generation with measuring voice quality etc.
- In-built web browser to check throughput of HTTP/FTP services.
- Tests VoIP i.e. measuring the jitter, packet loss, video quality as well as channel zap time.