CX100+ / CX110+ / CX120+ / CX150+ / CX180+: VePAL CATV Analyzers
- Handheld field meters designed for analog and digital CATV networks supporting VoIP and Internet Services.
- Comprehensive SLM features including single channel measurement, system scan, tilt, and installation check.
- Measure video and power level of NTSC, PAL and SECAM (Annex A) analog video signals.
- Carrier-to-Noise (C/N); Adjacent Channel measurement ratio.
- MER and Pre/Post BER measurements of QAM carriers with Constellation diagram.
- Measurement of QAM 64/256 digital signals including deep interleaved modulation.
- Forward and Reverse path ingress scan indicates the presence of noise and/or CSO/CTB interference.
- Supports advanced IP testing; Ping, trace route, ARP Wiz, VoIP, IPTV, WiFi, Web browser, and FTP upload/download via Ethernet or USB port where applicable.
CX 380: VePAL Advanced CATV Analyzer
- Next generation test solution designed for analog and digital cable TV networks with enhanced spectrum, digital channel, forward and return path sweep, and MPEG analysis.
- Comprehensive SLM features including single channel measurement, system scan, tilt, and installation check.
- Spectrum analysis to capture impulse noise and interference.
- Measurement of forward and return path QAM digital signals including deep interleaved modulation, MER, Pre/Post BER, Constellation diagram, Histogram, and equalizer on/off mode.
- Advanced Digital signal measurements* - HUM, EVM, Phase Jitter, Symbol Rate Error, Frequency and Frequency Response Error, Group Delay.
- Upstream Generator (USG)* - CW, QPSK and QAM-16/64/128/256 modulations.
- Video and audio power level measurements.
- NPEG Analysis.
MX100+/MX 120: Handheld Ethernet Tester
- Handheld metro and carrier Ethernet tester. Single or Dual port configurations for 10/100/1000 Base-T and 100/1000 Base-X.
- Large Touch screen based colour graphical LCD display with intuitive menu for very user friendly operational interface. Can also be operated by keypad.
- Layer 1 framed as well as unframed testing. Important for testing capability of dark fiber (Such as CWDM, DWDM) to handle Ethernet bandwidth.
- Layer 2, Layer 3 & Layer 4 BERT and RFC2544 testing.
- Supports asymmetrical RFC2544 testing for validation of services like 3G, DSL etc.
- Supports Omni-Q with 3 VLAN and MPLS tags.
- Tests VoIP i.e. SIP calls generation with measuring voice quality etc.
- In-built web browser to check throughput of HTTP/FTP services.
- Tests VoIP i.e. measuring the jitter, packet loss, video quality as well as channel zap time.